*NEW* RPM UPGRADE PACKAGE FOR ARRMA 6S Outcast Kraton Notorious V1-V4
ONLYUSD $61.98
Condition : New
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
check out CHICAGOLANDRC/ COM FOR MORE SAVINGS DOES NOT FIT V5 FITS V1-V4 This will work on the Current 6S V4 Kraton, Outcast, Notorious, Talion This Package Includes: QTY 2 - Front Arm Sets RPM81482 QTY 1 - Rear Arm Set RPM81402 QTY 1 - Rear Skid Plate RPM81442 QTY 1 - Wing Mounts RPM81642 QTY 1 - Mud Deflectors RPM81412 Quick Notes: – also fits the Durango DEX8T – roughly 10% lighter than stock – less slop for more accurate suspension settings – replaces stock ARRMA #AR330218 & #AR330219 – replaces stock Durango #TD330709 & #TD330710
Description RPM
A-arms for the ARRMA Kraton, Talion & Outcast as well as the Durango DEX8T are designed primary for strength and durability but we’ve added a few extra features in as well. First is slop elimination. Our A-arms reduce the amount of movement of the A-arm at the inner mounts, providing for better steering response and more consistent camber, caster and toe angle settings. Our next improvement is the addition of a second shock mount hole further out on the arm, providing for a lower profile suspension set-up, allowing the shocks to lay down a little further, dropping the ride height for a lower center of gravity. As an added bonus, our front A-arms are roughly 10% lighter than stock (59.5g – RPM
versus 66g stock)! RPM
A-arms are designed with leading and trailing 30° chamfered edges for smoother transitions over obstacles too tall for the suspension to clear. As an added benefit, these chamfered edges are more aerodynamic than stock as well. All RPM
A-arms are molded from our nearly indestructible blend of engineering grade nylons for performance you can rely on when the conditions are at their worst! Tech Notes: RPM
ARRMA Kraton, Talion, Outcast & Durango DEX8T A-arms are sold as one upper and one lower in each package. Two packages are needed for each vehicle. Our A-arms replace stock ARRMA #AR330218 & #AR330219 and also replaces stock Durango #TD330709 & #TD330710. Quick Notes: – also fits the Durango DEX8T – roughly 10% lighter than stock – less slop for more accurate suspension settings – optional Mud Guards also available – replaces stock ARRMA #AR330249 – replaces stock Durango #TD330707
Description RPM
Rear A-arms for the ARRMA Kraton, Talion & Outcast as well as the Durango DEX8T are designed for the ultimate in strength and durability while adding in some much-needed features. First is slop elimination. Our A-arms reduce the amount of movement of the A-arm at the hinge pins, providing for better suspension response and more consistent suspension settings.
Our next improvement is the addition of a second shock mount hole further out on the arm, providing for a lower profile suspension set-up. This second shock mount allows the shocks to lay down further and lowers the ride height for a lower center of gravity. This second shock mount matches the additional shock mount hole on our front A-arms ( RPM
#81482 – sold separately).
Another beneficial improvement comes from reduced weight. RPM
Kraton, Talion & Outcast Rear A-arms are roughly 10% lighter than stock AARMA A-arms (48g each versus 53g for stock)! RPM
rear A-arms have molded in mounting points for our optional mudguards – RPM #81412
(sold separately). If you plan on running through wet or muddy conditions, these guards are a must-have addition to help protect your driveline from debris kicked up from your front tires.
Our A-arms are designed with leading and trailing 30° chamfered edges for smoother transitions over obstacles too tall for the suspension to clear. As an added benefit, these chamfered edges are more aerodynamic than stock as well. All RPM
A-arms are molded from our nearly indestructible blend of engineering grade nylons for performance you can rely on when conditions are at their worst! Tech Notes: RPM
ARRMA Kraton, Talion, Outcast & Durango DEX8T A-arms are sold in pairs. Our A-arms replace stock ARRMA #AR330249 and stock Durango #TD330707. Stock Durango dirt guards (#TD330764) are not compatible with these A-arms (must use RPM
#81412 – sold separately).
Description RPM
A-arms for the ARRMA Kraton, Talion & Outcast as well as the Durango DEX8T are designed primary for strength and durability but we’ve added a few extra features in as well. First is slop elimination. Our A-arms reduce the amount of movement of the A-arm at the inner mounts, providing for better steering response and more consistent camber, caster and toe angle settings. Our next improvement is the addition of a second shock mount hole further out on the arm, providing for a lower profile suspension set-up, allowing the shocks to lay down a little further, dropping the ride height for a lower center of gravity. As an added bonus, our front A-arms are roughly 10% lighter than stock (59.5g – RPM
versus 66g stock)! RPM
A-arms are designed with leading and trailing 30° chamfered edges for smoother transitions over obstacles too tall for the suspension to clear. As an added benefit, these chamfered edges are more aerodynamic than stock as well. All RPM
A-arms are molded from our nearly indestructible blend of engineering grade nylons for performance you can rely on when the conditions are at their worst! Tech Notes: RPM
ARRMA Kraton, Talion, Outcast & Durango DEX8T A-arms are sold as one upper and one lower in each package. Two packages are needed for each vehicle. Our A-arms replace stock ARRMA #AR330218 & #AR330219 and also replaces stock Durango #TD330709 & #TD330710. Quick Notes: – also fits the Durango DEX8T – roughly 10% lighter than stock – less slop for more accurate suspension settings – optional Mud Guards also available – replaces stock ARRMA #AR330249 – replaces stock Durango #TD330707
Description RPM
Rear A-arms for the ARRMA Kraton, Talion & Outcast as well as the Durango DEX8T are designed for the ultimate in strength and durability while adding in some much-needed features. First is slop elimination. Our A-arms reduce the amount of movement of the A-arm at the hinge pins, providing for better suspension response and more consistent suspension settings.
Our next improvement is the addition of a second shock mount hole further out on the arm, providing for a lower profile suspension set-up. This second shock mount allows the shocks to lay down further and lowers the ride height for a lower center of gravity. This second shock mount matches the additional shock mount hole on our front A-arms ( RPM
#81482 – sold separately).
Another beneficial improvement comes from reduced weight. RPM
Kraton, Talion & Outcast Rear A-arms are roughly 10% lighter than stock AARMA A-arms (48g each versus 53g for stock)! RPM
rear A-arms have molded in mounting points for our optional mudguards – RPM #81412
(sold separately). If you plan on running through wet or muddy conditions, these guards are a must-have addition to help protect your driveline from debris kicked up from your front tires.
Our A-arms are designed with leading and trailing 30° chamfered edges for smoother transitions over obstacles too tall for the suspension to clear. As an added benefit, these chamfered edges are more aerodynamic than stock as well. All RPM
A-arms are molded from our nearly indestructible blend of engineering grade nylons for performance you can rely on when conditions are at their worst! Tech Notes: RPM
ARRMA Kraton, Talion, Outcast & Durango DEX8T A-arms are sold in pairs. Our A-arms replace stock ARRMA #AR330249 and stock Durango #TD330707. Stock Durango dirt guards (#TD330764) are not compatible with these A-arms (must use RPM
#81412 – sold separately).
Returns Accepted for this item if it's within 30 Days
Price type
IN STOCK
OUT STOCK
.
